1 1

Cavalor - LactaTec Paste

Cavalor - LactaTec Paste

$35.99 AUD
$35.99 AUD
Sale Sold out
Taxes included. Shipping calculated at checkout.

Key Ingredients

Recommended Use

how to measure your horse for a double show bridle

Before You Measure A Horse for a 2 in 1 Double Bridle:

  • You will need a flexible measuring tape
  • Make sure your bridle is done up on the correct holes with the bits you will be using. Bits can radically change the size of bridle you require
  • Measure your already assembled bridle - no need to disassemble and make flat


Measuring A Horse for a 2 in 1 Double Bridle:

  1. Take your measuring tape and measure your bradoon bit (snaffle) from end to end. Start at the corner of the bit where the leather attaches. Take the tape over the crown to the bit on the other side. Do not include the ring in the measurement, only your bridle.
  2. Now take the tape and do the same for the bit (curb). Measure the top of the bit over the crown to the top of the bit on the other side.
    Please note: We recommend as a general rule to purchase a bradoon cheekpieces one size smaller than your curb as the bradoon bits sits higher in the mouth. However, confirm your sizes from your measurements.
  3. Measure the browband from end to end
  4. Measure the circumference of the noseband. Do it up on the hole it is normally done up on. Start at the buckle and measure on the outside of the noseband around the circumference back to the buckle.

Please note: All of our measurements are on the middle holes. Please add your measurements to notes on checkout if you are unsure and we can match your measurements or will contact you if there are any queries.

We recommend you watch the how to measure your double bridle youtube tutorial. See below for a link.

Please email us with any questions on sales@ffequestrian.com


 

FOR OUR INTERNATIONAL CUSTOMERS 
HERE IS A SIZE COMPARISON FOR YOUR LOCAL SIZING

BRADOON HANGER MEASUREMENT

BIT TO BIT MEASUREMENT

MEASUREMENTS ARE TAKEN WITH THE CHEEK PIECES MOUNTED ON THE MIDDLE HOLE OF THE HEADPIECE STRAPS

BROWBAND MEASUREMENT

MEASUREMENTS ARE TAKEN FROM END TO END OF THE BROWBAND

NOSEBAND MEASUREMENT

MEASURE THE CIRCUMFERENCE OF THE NOSEBAND, STARTING AND ENDING WITH THE BUCKLE

NOSEBAND WIDTH MEASUREMENT

 

HEADPIECES MEASUREMENT

CHEEKPIECES MEASUREMENT

REINS MEASUREMENT

View full details

Cavalor® LactaTec helps muscles perform optimally at peak times and promotes a speedy recovery, preventing muscle fatigue and keeping your horses supple each day

Key Features

  • A complete supplement to support muscle activity and to prevent stiffness, damage and fatigue
  • Contains a highly potent mineral and antioxidant mix to protect the horses muscles and prevent acidification and muscle damage
  • Contains Lysine and Methionine which make up the building blocks for the proteins from which the muscle cells can be built
  • Aids in the horse sustaining peak performance during intense training and multi-day events

Cavalor® LactaTec is the most complete supplement, acting in multiple ways to support muscle activity, stimulate muscle recovery and prevent muscle issues such as stiffness, damage and fatigue. Thanks to efficient contributions to numerous metabolic processes, the muscles stay supple and capable of converting energy effectively without side effects. As a result, the horse can sustain peak performance even during periods of intensive training or multi-day events.

 

RECOMMENDED USE

LactaTec paste is rapidly absorbed and handy for occasional use such as for competitions or more intensive training.

In these cases, give 1/2 syringe the night before and 1/2 syringe on the morning of the event. An additional dose of LactaTec Paste immediately following the exercise will significantly enhance recovery.

LactaTec paste is rapidly absorbed and handy for occasional use such as for competitions or more intensive training. In these cases, give 1/2 syringe the night before and 1/2 syringe on the morning of the event. An additional dose of LactaTec Paste immediately following the exercise will significantly enhance recovery.

 

KEY INGREDIENTS

The power of nature

Cavalor LactaTec is based on Cavalor Muscle Fit. For improved muscle support, essential oils such as Petroselinum sativum and Citrus aurantifolium have been added. The active components of Citrus aurantifolium are strong antioxidants, preventing the formation of harmful free radicals. It also acts as a muscle relaxant.

Petroselinum sativum contributes to effective muscle recovery after strenuous exercise. It has a purifying effect, removing toxins from the body more rapidly and allowing for effortless transport of oxygen to the muscles, delaying muscle fatigue.

Muscle cell support for supple, healthy muscle activity Cavalor LactaTec contains minerals such as sulphur (S), magnesium (Mg) and manganese (Mn) that reduce muscle tension and promote flexibility and stamina of the muscles. These minerals have been formulated for easy absorption by the horse to ensure optimal effectiveness.

One example is methylsulfonylmethane (MSM). Although MSM is best known for its beneficial effects on the joints, it also contributes to proper muscle function. MSM relaxes the muscles, acts as an antioxidant and also stimulates blood circulation. In this way, MSM promotes the body decomposition and excretion of waste products. In addition, a complex of B vitamins including vitamin B1, B2 and B12 improves the horse carbohydrate metabolism, neural transmission and the oxygen supply to the muscles.

Highly potent antioxidant mix for maximum protection Cavalor LactaTec contains a very powerful combination of antioxidants, providing a proven and extremely strong defence against free radicals at relatively low ingredient dosages.

Besides vitamin E and selenium, the standard antioxidants present in most muscle supplements found on the market, Cavalor LactaTec also contains vitamin C, beta-carotene and bioflavonoids.

Glutamine: Is a building block for glutathione, an antioxidant. Glutathione is important in the recovery process following an injury. This combination of ingredients greatly increases the production of glutathione in the body and triggers multiple processes for both intracellular and extracellular protection of the muscle cells. Efficient muscle repair prevents acidification and muscle damage

Cavalor LactaTec contains betaine, precursor to dimethylglycine, which primarily ensures efficient oxygen transport to the muscles, reducing lactate production and storage. Zinc, included in a chelated form, accelerates lactate breakdown, while sodium bicarbonate and sodium tripolyphosphate act as buffers, contributing further to effective muscle recovery.

By neutralising lactate and restoring the acid-base balance, it helps prevent muscle acidification and stiffness. The amino acids glycine, L- cysteine, glutamine, lysine and methionine included in Cavalor LactaTec function as building blocks for the proteins from which the muscle cells are constructed.